Allmand PORT-A-LITE Operatör El Kitabı - Sayfa 10

Çalışma Işığı Allmand PORT-A-LITE için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Allmand PORT-A-LITE 20 sayfaları.

ELECTROCUTION HAZARD

Do not operate the light tower if the insulation

on the electrical cord or other electrical wiring is

cut or worn or if bare wires are exposed. Repair

or replace damaged wiring before putting unit

into service.

ELECTROCUTION HAZARD

Positioning the unit or cord in water can cause

electrocution. Always position the unit and cord

on dry ground.

To operate light fixture:

1. Plug base unit cord into wall socket or gen-

erator outlet (240V, 50Hz) only.

2. Using ON/OFF switch located on the base

unit move switch to ON position.

3. The light will begin to illuminate after a brief

warm-up period.

To shutdown the unit:

1. Using the ON/OFF switch located on the

base turn the switch to the OFF position.

2. Unplug the unit from the (204V, 50Hz) wall

socket or generator outlet.

NOTICE:



When disconnecting cords, pull on the plug

and not the cord.



The bulb and light fixture need to cool-down

before it can be re-illuminated. Allow 10-15

minutes after shut-down before turning the

light fixture on again.

OPERATION

CORD (240V )

ON/OFF SWITCH