Miele Novotronic G 841 SC Plus Kullanım Talimatları Kılavuzu - Sayfa 15
Bulaşık Makinesi Miele Novotronic G 841 SC Plus için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele Novotronic G 841 SC Plus 48 sayfaları. Miele novotronic dishwasher operating instructions
Ayrıca Miele Novotronic G 841 SC Plus için: Kullanım Talimatları Kılavuzu (49 sayfalar)
Sayfayı Yazdır
Programming the water softener
Your water hardness level must be pro-
grammed into the dishwasher using the
program selector and buttons on the
control panel.
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Start" button and
at the same time turn on the dish-
washer with the "On/Off" button. Re-
lease the "Start" button within two
seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator flashes or lights,
the above steps must be repeated.
Before using for the first time
^ Turn the program selector to the posi-
tion which corresponds to the water
hardness in your area (see table).
gr/gal*
ppm
1 - 4**
20 -
5 - 7
90 - 130
8 - 10
140 - 180
11 - 13
200 - 230
14 - 16
250 - 290
17 - 22
310 - 400
23 - 35
410 - 630
36 - 70
650 - 1260
* US gallons
** factory preset
Example:
Water hardness is 20 gr/gal.
Turn program selector to "6 o'clock"
position.
Selector
setting
70
Normal Plus
Normal
Rinse & Hold
4 o'clock position
5 o'clock position
6 o'clock position
7 o'clock position
8 o'clock position
15