Miele DA 199 Kullanım Talimatları Kılavuzu - Sayfa 19

Havalandırma Davlumbazı Miele DA 199 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele DA 199 28 sayfaları. Cooker

Retaining plates

There are three retaining plates A, B

and C for fixing the cooker hood to the

wall.

Before mounting the retaining plate

draw a vertical line centrally on the

back wall at the selected position.

First of all drill the holes for attaching

the vapour guide (canopy) and for fit-

ting the retaining plate A.

Mark measurement S from the hob

surface upwards. This marks the

height of the lower rim of the cooker

hood.

Holes for the vapour guide (canopy).

DA 196

Drill a 6 mm diameter hole

middle line 22 mm above the height

marked S and insert a S6 plug into the

hole.

DA 199

Drill two 6 mm diameter holes

above the height S and 250 mm right

and left of centre. Insert S6 plugs.

Retaining plate A

Drill 2 holes, 8 mm in diameter, one

at S +100 mm and one at S + 425

mm on the centre line for the retain-

ing plate and insert S8 plugs

Installation

on the

22mm