Miele DA 249-2 Alu Çalıştırma ve Kurulum Talimatları - Sayfa 22
Havalandırma Davlumbazı Miele DA 249-2 Alu için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DA 249-2 Alu 36 sayfaları.
Sayfayı Yazdır
Cleaning and care
Changing a halogen lamp
Disconnect the cooker hood from
the mains supply by
– switching it off at the wall socket
and removing the plug, or
– withdrawing the fuse from the
fused spur connection unit, or
– withdrawing the mains fuse, or
– removing the screw-out fuse, (in
countries where this is applicable).
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off.
Do not touch the surface directly
when changing a lamp as grease
particles from your fingers will ad-
here to the surface and damage it.
Please follow manufacturer's instruc-
tions.
22
^ Remove the stainless steel filter (see
"Cleaning and care – Remove the
stainless steel filter").
^ Pull the halogen lamp out of its
socket. Take care not to let the lamp
fall onto the hob below.
^ Fit the new halogen lamp into its
socket and carefully push it into posi-
tion.
When replacing a defective lamp it
is essential to use exactly the same
type of lamp (see "Technical data"
for lamp specification).