Miele DA 3590 EXT Çalıştırma ve Kurulum Talimatları - Sayfa 18

Havalandırma Davlumbazı Miele DA 3590 EXT için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DA 3590 EXT 44 sayfaları. Cooker hood

Sayfayı Yazdır

Cleaning and care

Before any cleaning or

maintenance work is carried out,

disconnect the cooker hood from the

mains supply.

Exercise caution when changing

halogen lamps. They get very hot

during use and remain hot for some

time after being switched off. The

hot lamps are also susceptible to

damage from damp cleaning. Wait a

few minutes after switching off

before commencing cleaning.

Housing

General

The surfaces and controls are

susceptible to scratches and

abrasion. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using warm water with a

little washing up liquid applied with a

soft sponge.

^ Wipe the surfaces dry using a soft

cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Avoid:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners or cream cleaners

and abrasive sponges, as well as pot

scourers or sponges which have

been used previously with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using Miele's non-abrasive cleaning

agent for stainless steel, following the

manufacturer's instructions on the

packaging.

To help prevent re-soiling, Miele

conditioning agent for stainless steel

can also be used. Follow the

instructions on the packaging.