Miele DA 6290 D Çalıştırma ve Kurulum Talimatları - Sayfa 25
Havalandırma Davlumbazı Miele DA 6290 D için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DA 6290 D 32 sayfaları.
Ayrıca Miele DA 6290 D için: Çalıştırma ve Kurulum Talimatları (36 sayfalar)
Sayfayı Yazdır
,
WARNING
Danger of toxic fumes.
Gas cooking appliances release
carbon monoxide that can be
harmful or fatal if inhaled.
To reduce the risk of fire and to
properly exhaust air, the exhaust
gases extracted by the hood
should be vented outside of the
building only.
Do not vent exhaust air into
spaces within walls or ceilings or
in attics, crawl spaces or garages.
To reduce the risk of fire, only use
metal ductwork.
Please read and follow the
"IMPORTANT SAFETY
INSTRUCTIONS" to reduce the risk of
personal injury. Follow all local building
codes when installing the hood.
Exhaust ducting and connections
Use smooth or flexible pipework made
from approved non-flammable
materials for exhaust ducting.
To achieve the most efficient air
extraction and quietest noise levels,
consider the following:
– The diameter of the ductwork should
not be less than 6" (150 mm).
– If flat ducting is used, the cross
section must not be smaller than the
cross section of the vent collar.
– The ducting should be as short and
straight as possible.
– Use ductwork with a large radius.
– The exhaust ducting must not be
bent or compressed.
– Make sure all connections are secure.
– Where the ductwork is horizontal, it
must slope away from the hood at
least 1/8" per foot (1 cm per meter).
This is to prevent condensation
dripping into the ventilation hood.
– If the exhaust is ducted through an
outside wall, a telescopic wall vent or
a roof duct can be used.
– If the exhaust is ducted into an
inactive flue, the air must be expelled
parallel to the flow direction of the
flue.
Air extraction
25