Miele DA2210 Çalıştırma ve Kurulum Talimatları - Sayfa 12

Havalandırma Davlumbazı Miele DA2210 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DA2210 40 sayfaları. Cooker
Ayrıca Miele DA2210 için: Çalıştırma ve Kurulum Talimatları (36 sayfalar), Boyut Kılavuzu (1 sayfalar), Kullanım ve Kurulum Kılavuzu (40 sayfalar), Çalıştırma ve Kurulum Talimatı (40 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kurulum Talimatları Kılavuzu (19 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar)

Sayfayı Yazdır
Miele DA2210 Çalıştırma ve Kurulum Talimatları

Modes of operation

The rangehood works with
. . . air extraction:
The air is drawn in and cleaned by the
grease filters and directed outside.
If the on-site ventilation system does
not have a non-return flap, then the
non-return flap supplied with the
appliance must be fitted in the exhaust
socket in the motor unit.
The DA 2210 has two motors and
requires two non-return flaps to be
fitted.
Having a non-return flap fitted in the
ducting ensures that air, once ducted
to the outside, cannot get back into the
room again.
The flap is closed when the rangehood
is switched off.
When the rangehood is switched on,
the non-return flap opens for the
cooking vapours to be blown directly
outside.
Please note, the performance of
this rangehood hinges greatly on
the installed ducting to vent the
vapours. Poor choice of ducting
results in poor rangehood
performance. For ducting
recommendations, please refer to
the relevant section in these
operating instructions or contact a
specialised installer.
12
. . . air recirculation:
(requires a conversion kit and charcoal
filters: see "Technical Data")
The air is drawn in and cleaned first by
the grease filters and then by the
charcoal filters (2 on the DA 2250, DA
2270 and 4 on the DA 2210). The
cleaned air is then recirculated back
into the kitchen.
Before using the rangehood in
recirculation mode, ensure that the
charcoal filters are in place. See
"Cleaning and care".
. . . an external motor:
(EXT models only)
EXT models are designed to be
connected to an external motor located
outside the room.
The external motor is connected to
the rangehood by means of a
control cable, and is operated by
the controls on the rangehood.