Miele DAG 500 Çalıştırma ve Kurulum Talimatları - Sayfa 33

Havalandırma Davlumbazı Miele DAG 500 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DAG 500 40 sayfaları. Downdraft ventilation system

Miele DAG 500 Çalıştırma ve Kurulum Talimatları
^ Connect the appliance to the electric
power supply.
Observe the "Important safety
instructions" and "Electrical
connection" warnings.
^ Place the cover panel onto the vent
and push until it clicks in place.
^ Press the On/Off button on the top of
the ventilation system.
The vent will rise and the fan will turn on.
^ Press and hold the 0/1 button until
the fan turns off.
Remove the transport protection
piece.
^ Remove the protective plastic from
the housing. If necessary, remove the
cover panel again.
^ Replace the cover panel and secure
it with 2 nuts.
^ Remove the backing from the grease
filters.
^ Place the filters in the bottom of the
vent. Press them downwards at the
edge so that they clip into the frame
at the top.
^ Press the 0/1 button to restart the
ventilation system.
^ Connect the vent duct.
When connecting the vent duct,
observe the "Important safety
instructions" and "Air extraction"
warnings.
Installation
33