Miele DAR 1230 Çalıştırma ve Kurulum Talimatları - Sayfa 11

Havalandırma Davlumbazı Miele DAR 1230 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DAR 1230 40 sayfaları. Range wall / insert hood
Ayrıca Miele DAR 1230 için: Çalıştırma ve Kurulum Talimatları (32 sayfalar), Çalıştırma ve Kurulum Talimatları (22 sayfalar), Çalıştırma ve Kurulum Talimatları (40 sayfalar)

Sayfayı Yazdır
Miele DAR 1230 Çalıştırma ve Kurulum Talimatları
Be sure to observe the information contained in the "Installation"
section when mounting the ventilation hood.
Metal parts can have sharp edges which may cause injury.
Wear gloves to protect your hands from being cut.
When installing the exhaust duct, only use pipes or tubes made of
non-flammable material. These can be obtained from your Miele
dealer or from Miele Technical Service.
Exhaust air should not be vented into a chimney or vent flue which
is otherwise in use and should not be channeled into ducting which
ventilates rooms with fuel-burning installations.
If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
WARNING: TO REDUCE THE RISK OF FIRE USE ONLY METAL
DUCTWORK.
Cleaning and maintenance
Never use a steam cleaner to clean the ventilation hood.
The steam can reach the electrical components and cause a short
circuit.
Accessories
Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty will become void.
IMPORTANT SAFETY INSTRUCTIONS
11