Miele DAS 2920 Çalıştırma ve Kurulum Talimatları - Sayfa 18

Havalandırma Davlumbazı Miele DAS 2920 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DAS 2920 36 sayfaları.
Ayrıca Miele DAS 2920 için: Çalıştırma ve Kurulum Talimatları (40 sayfalar)

Miele DAS 2920 Çalıştırma ve Kurulum Talimatları
Operation

Power management

The ventilation hood is equipped with a
power management system. Power
management helps to save energy. It
ensures that the blower power level is
reduced automatically and that the
lighting is switched off.
- If the booster level is selected, the
blower automatically switches to
level 3 after 5 minutes.
- If the blower is set to level 3, 2, or 1,
it switches back one blower setting
after 2 hours and then in 30-minute
intervals until the blower eventually
switches off.
- The overhead lighting will switch off
automatically after 12 hours.

Turning power management on/off

You can deactivate power
management.
Keep in mind that this may increase
energy consumption.
 To set this option, turn off the fan and
the overhead lighting first.
 Press the  and  buttons at the
same time for approx. 10 seconds,
until 1 lights up.
 Then, press the following buttons in
succession:
- the lighting button ,
- followed by the  button and then
- the lighting button .
If power management is turned on, the
1 and B indicators will be continuously
lit.
If it is turned off, the 1 and B indicators
will flash.
18
 Press the  button to turn power
management off.
The 1 and B indicators will flash.
 To turn it on, press the  button.
The 1 and B indicators will be
continuously lit.
 Confirm your choice with the On/Off
button .
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the ventilation system
reverts to the previous setting.

Safety shut-off

If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12 hours if it has been left on (blower
and overhead lighting).
 To switch it back on, press the On/
Off  control or the lighting
control .