Miele DDG 102 Kurulum Talimatları Kılavuzu - Sayfa 12

Havalandırma Davlumbazı Miele DDG 102 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele DDG 102 28 sayfaları. External motor roof installation
Ayrıca Miele DDG 102 için: Kullanım ve Kurulum Kılavuzu (24 sayfalar), Çalıştırma ve Kurulum Talimatları (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar)

Installation

 Make a  185 mm hole in the wall.

 Push the telescopic wall pipe into the

hole so that it is sitting flush.

The telescopic wall pipe will make it

easier to feed the control cable and

the flexible ducting through later on.

 Position the motor unit bracket on the

outside wall. The control cable

connection must be at the bottom.

 Mark the position of the 3 holes to be

drilled.

 Drill three 8 mm  holes and insert

S8 plugs in the holes.

 Connect the 3 mountings through the

fixing holes in the motor unit bracket

as illustrated.

 Position the bracket onto the outside

wall again and feed the control cable

with the six-pole connectors through

the telescopic wall pipe into the

house.

 If equipotential bonding is required,

pull the earth cable through the hole

provided in the motor unit bracket.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").