Miele PUR 98 D Çalıştırma ve Kurulum Talimatları - Sayfa 15

Havalandırma Davlumbazı Miele PUR 98 D için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele PUR 98 D 44 sayfaları. Ventilation system
Ayrıca Miele PUR 98 D için: Çalıştırma ve Kurulum Talimatları (40 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar), Çalıştırma ve Kurulum Talimatları (48 sayfalar), Manuel (48 sayfalar)

Miele PUR 98 D Çalıştırma ve Kurulum Talimatları

Turning on the blower

Switch the blower on as soon as you
start cooking. This is to ensure that
vapors are captured right from the start.
 Press the On/Off control .
The blower turns on at level 2. The 
symbol and 2 will light up in the blower
level display.

Selecting the power level

Power levels 1 to 3 are available for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the B
Booster setting.
 Select the power level you want by
pressing the  or  control.
Reducing power down from the
Booster setting
If power management is activated
(default setting), the blower
automatically switches back to level 3
after 5 minutes.

Delayed shut-down

 It is advisable to run the blower for a
few minutes after cooking has
finished.
This helps to neutralize any lingering
vapors and odors in the air.
It also reduces the risk of residues
accumulating in the ventilation hood
and any resulting odors.

Turning off the blower

 Press the On/Off control  to turn
the blower off.
The  symbol will go out.
Turning the overhead lighting
on/off
The overhead lighting can be turned on
and off separately from the blower.
 To do this, press the lighting
control .
The  symbol will light up when the
overhead lighting is turned on.

Power management

The ventilation hood is equipped with a
power management system. Power
management helps to save energy. It
ensures that the blower power level is
reduced automatically and that the
lighting is switched off.
- If the booster level is selected, the
blower automatically switches to
level 3 after 5 minutes.
- If the blower is set to level 3, 2, or 1,
it switches back one blower setting
after 2 hours and then in 30-minute
intervals until the blower eventually
switches off.
- The overhead lighting will switch off
automatically after 12 hours.
You can deactivate power
management.
Keep in mind that this may increase
energy consumption.

Operation

15