Miele PT 8401 Kullanım Talimatları Kılavuzu - Sayfa 9
Kurutucu Miele PT 8401 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele PT 8401 26 sayfaları.
Sayfayı Yazdır
Control panel PT 8253, 8333, 8403, 8503, 8803 Profitronic B Plus Residual moisture programmes
3
1 Segment display - Residual moisture
3 Low temperature (additional option) button
5 Fluff filter fault indicator
7 Programme selection rotary control
Mains On/Off switch s
Switches the machine on or off.
Low temperature (additional option) button K
Lowers the drying temperature (by approx. 20°C).
Use for delicate fabrics (e.g. synthetics). The LED will
light up.
Programme selection rotary control
For selecting the drying programme.
A: Minimum iron
Drying
Moisture 10%
Moisture 20%
Delicates
Woollens
Timed drying warm
START/STOP button
Press the Start/Stop button to start or stop the drying
programme.
Description of dryers PT 8253, 8333, 8403, 8503, 8803
1
2
4
5
2 Programme sequence display
4 Venting system fault indicator
6 START/STOP button
8 On/Off switch
B: Cottons
Drying plus
Drying
Moisture 20%
Moisture 25%
Moisture 40%
Timed drying cold
6
7
Segment display
Before the start of a programme this shows the
residual moisture which has been allocated to the
programme as a %.
After the start of a programme it shows the residual
moisture which is currently in the laundry until the
programme is finished.
It also shows fault messages, see "Problem solving
guide".
It can also show h for "Peak load cut-out" (optional).
Programme sequence display
The programme sequence is displayed in three
stages. The stage the programme is at will be
highlighted in yellow.
!
Drying
L
Cooling down
O
Programme finished / Anti-crease
Check venting system 0 fault indicator
This will light up if there is a problem with the venting
system.
Clean the fluff filter W fault indicator
This light up when the fluff filter needs to be cleaned.
8
9