Miele T 586 C Kullanım Talimatları Kılavuzu - Sayfa 12

Kurutucu Miele T 586 C için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Miele T 586 C 32 sayfaları. Novotronic super condenser tumble dryer

Sayfayı Yazdır

Programme selection

Opening the door during a pro-

gramme

The door can be opened during a pro-

gramme to add items for drying, or to

remove items early. To continue the

programme:

Close the door

Press "START"

(N.B. The programme will not continue

if it has already reached the "anti-

crease" stage.)

To change or select a different pro-

gramme during drying:

(This is only possible if the "Child

safety" feature has first been cancelled)

Press the required programme selec-

tor touch pad.

A change is only possible within the

programme group already chosen,

(e.g. Cottons to Cottons, but NOT Cot-

tons to Timed drying, or Timed drying

to Minimum Iron).

It is too late to change a programme

once the "cooling down" phase has

been reached.

If you have chosen a programme in the

wrong group:

Switch the machine off and then on

again.

Select the correct programme, and

Delay start if required.

To change the length of time in a

"Timed drying" programme or for Delay

start:

Press the > or $ touch pad.

To change a programme where the

"Child safety" feature is activated:

This is not possible after the "START"

touch pad has been pressed to start

the programme.

If you wish to make a change:

Switch the machine off and then on

again.

Select the correct programme, and

Delay start if required.

After drying:

Remove the laundry

Switch off the machine using the "On-

Off" button.

Clean the fluff filter.

Empty the condensed water con-

tainer.

To cancel or delete a programme:

Switch off the machine using the "On-

Off" button.

What to do in a power cut

The programme stage reached or

the delay start time is stored in the

machine's memory. As soon as the

power is restored the programme

continues.

If the power cut is longer than 30

minutes, the "START" touch pad must

be pressed to continue the programme.

The programme will not continue if it

has already reached the "anti-crease"

stage.