Miele TOUCHTRONIC T 9802 Çalıştırma ve Kurulum Talimatları - Sayfa 36

Kurutucu Miele TOUCHTRONIC T 9802 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele TOUCHTRONIC T 9802 44 sayfaları. Vented dryer
Ayrıca Miele TOUCHTRONIC T 9802 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar)

Sayfayı Yazdır

Installation

Installation tips

An airflow gap of

be provided between the appliance

and the floor. This airflow gap must

not be blocked by a toe-kick or thick

piled carpets.

Sufficient venting of the installation

site, e.g. by opening a window or

door, is essential for the dryer's

operation. Otherwise drying times

and energy usage may increase.

Do not install the dryer next to a

refrigerator. The heat emanating

from the dryer can affect the

thermostat of the refrigerator,

causing it to run continuously.

Room ventilation

The room air, which is taken in when

the dryer is in operation, is blown out

via the exhaust vent. It is important,

particularly if the room is small, to

ensure adequate ventilation and air

supply. Opening a window, for

example, will allow more air to enter the

room. Otherwise drying times and

energy consumption may increase.

" (10 mm) must

Determining the position of the

exhaust connection

The exhaust connection can be left at

the rear of the dryer (factory standard)

or moved to the left or right side.

Changing the position of the exhaust

connection

^ Remove the exhaust connection

cover on the left or right side of the

dryer by turning it counterclockwise

and take it out.

^ Firmly press the cover into the rear

opening.