HP 530 - Notebook PC Kullanıcı Kılavuzu - Sayfa 14

Masaüstü HP 530 - Notebook PC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HP 530 - Notebook PC 17 sayfaları. Notebook pc
Ayrıca HP 530 - Notebook PC için: Kullanıcı Kılavuzu (15 sayfalar), Yazılım Güncellemesi (12 sayfalar), Kurulum Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Şartname (19 sayfalar)

Sayfayı Yazdır

Using the MEBx setup utility menus

NOTE:

For more information on iAMT, see the Intel Web site at http://www.intel.com/vpro.

Intel ME Configuration

Select

Intel ME State Control

Intel ME Firmware Local Update

LAN Controller

Intel ME Features Control

Intel ME Power Control

Intel AMT Configuration

Select

Host Name

TCP/IP

Provisioning Server

Provision Model

Set PID and PPS

Un-Provision

SOL/IDE-R

Secure Firmware Update

Set PRTC

Idle Timeout

Change Intel ME Password

Select

Change ME Password

Chapter 2 Using Intel Active Management Technology (select models only)

To do this

Disable/enable the management engine.

Disable/enable local management of firmware updates.

Disable/enable the integrated network controller.

Enable AMT or none.

Configure the management engine power policies.

To do this

Assign a host name to the computer.

Disable/enable network interface or DHCP (assigns an IP

address if DHCP has been disabled) or change the domain

name.

Assign a Provisioning server address.

Assign Enterprise or Small Business Intel AMT model.

Enter PID and PPS.

Reset the AMT configuration to factory defaults.

Enable remote boot control to IDE floppy or CD-ROM and

assign a username and password.

Enable or disable updating firmware remotely.

Set the real-time clock.

Set a time-out value.

To do this

Change the password.

NOTE:

The default password is admin.