HP 800 Series Kurulum Kılavuzu - Sayfa 20

Masaüstü HP 800 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP 800 Series 34 sayfaları. Version a.01.08
Ayrıca HP 800 Series için: Yayın Notu (19 sayfalar)

Sayfayı Yazdır
HP 800 Series Kurulum Kılavuzu
C A U T I O N
Using OmniBook Disk Drives
Restoring OmniBook Software
7. Exit Windows, if necessary, then reboot the OmniBook from the Support
Utilities disk by pressing the reset button. (To restart from the floppy drive, the
System Configuration Utility must have System, Boot Devices set to FDD First.)
8. Select the option Install Windows for Workgroups Drivers and HP Applications
Software, which loads the special drivers you need with the OmniBook. It also
loads OmniBook-specific software: the online User's Guide, the Appointment
Book, the Phone Book, the HP Calculator, OmniBook diagnostics, OmniBook
Tools, and the icon-print routine for shortcut key assignments.
9. Select the WfW Install option appropriate for your CD-ROM drive: SCSI port or
PC-card slot/parallel port.
This re-installation process can take an hour or more. When the above installation is
done, you can use Windows to add printers and enable networks.

To restore an alternate operating system

The following procedure describes how to restore an alternate operating system
and your original OmniBook software. These steps will delete any software or files
you may have installed or created on your hard disk since the original set-up. Back up
what you would like to save.
You provide the software to install the alternate operating system. You will need the
OmniBook-specific drivers provided on the Recovery CD-ROM, under
OMNIBOOK\DRIVERS\WINNT or OMNIBOOK\DRIVERS\OS2. Different versions of
an operating system require different drivers, so make sure to select the appropriate
driver.
You can also find the drivers on the OmniBook's hard drive under
C:\OMNIBOOK\DRIVERS.
Before you start installing a new operating system, make sure the drivers you
need will be accessible after the installation
If you do not have a CD-ROM drive, then copy the drivers you need from the
OmniBook directory of the hard disk to a floppy disk. Alternatively, check our
World Wide Web site ( http://www.hp.com/ go/omnibook) for the drivers.
1. Install your alternate operating system.
1-20
.