ALLN-1 2k20 Mini Edt. Montaj Talimatları Kılavuzu - Sayfa 6
Fitness Ekipmanları ALLN-1 2k20 Mini Edt. için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. ALLN-1 2k20 Mini Edt. 10 sayfaları.
Sayfayı Yazdır
1.
Locate the Footplate and Footplate Rod
2.
Attach a female knob to one end of the Footplate Rod
3.
While holding the Footplate, insert the Footplate Rod through the
rd
3
hole (from the top) of the Vertical Runner (Short) from Step 7,
all the way through to the other Vertical Runner
4.
Secure knob using another female knob to tighten the Footplate.
This is also shown in the online video.
Note: The Footplate is designed to swivel
STEP 9: ATTACHING THE SEAT ARCH
1.
Locate the Seat, Seat Arch and Seat Rod
2.
Align the center hole on the Seat Arch to the Seat, and insert (2)
¼ 3" bolt into the outer holes of the Seat and Seat Arch. Loosely
hand tighten
3.
Insert (2) male knobs through both sides of the Seat bar, then
attach Seat Swivels to knobs going through Seat bar.
4.
Make sure the knobs are screwed into the TOP HOLE of the Seat
Swivel.
5.
Partially insert (2) additional male knobs into the bottom holes of
the Seat Swivels.
6.
Slide Seat Swivels on to the out 2k20 vertical base bars.