Miele F 1813 SF Kurulum Talimatları Kılavuzu - Sayfa 12

Buzdolabı Miele F 1813 SF için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele F 1813 SF 33 sayfaları.

Installing the appliance

Aligning the housing unit

The housing unit must be carefully

aligned using a spirit level before

installing the appliance. The unit

corners must be at right angles, as

otherwise the furniture door will not

align correctly with the 4 corners of the

appliance.

– The side panels of the housing must

be even.

– The housing unit panels must be at

least 16 mm thick.

– The plinth facing must be at least

13 mm thick (or preferably 19 mm).

Check the installation niche

To ensure a safe, trouble-free

installation and the best possible

cosmetic result, check to be sure

that the installation space complies

with the installation requirements.

^ Check the base (see "Installation").

^ Check the dimensions of the cavity.

^ Check that the cavity is square.

^ Check the location of the power

outlet.

^ Check the location of the water

connection (see "Plumbing").

^ Check that all furniture parts in the

vicinity of the appliance are securely

connected to the wall.

^ Check that the adjacent

furniture/fixtures do not collide with

the open door.

Caution - the appliance is very

heavy. Use caution when unpacking

and opening the door, danger of

tipping.

^ To protect the base from damage

during installation, attach a hard

board, linoleum, etc., to the floor in

front of the intended installation

location.

^ Take the supplied accessories out of

the protective packaging.