Miele F 1913 SF Kurulum Talimatları Kılavuzu - Sayfa 19
Buzdolabı Miele F 1913 SF için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele F 1913 SF 33 sayfaları.
Aligning the appliance
^ Align the appliance with the
surrounding cabinets.
The height-adjustable feet at the front
and rear can all be adjusted from the
front.
– Front: with an open-ended wrench
½" (SW 13).
The feet can be adjusted from the
top and bottom c.
5
– Rear: with a
/
16
driver via flexible shaft d.
Important!
When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
" (8 mm) hex nut
Installing the appliance
– Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
dimension 1 1/4" (32 mm). The guide
dimension of 1 1/4" (32 mm) is
related to a niche height of 84"
(2134 mm).
^ Align the appliance again using a
level.
^ If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
Note:
– Do not twist or jam the appliance
inside the niche. When unscrewing
the height-adjustable feet, proceed
gradually, alternating between left
and right.
– The adjustment of the rear feet is
aided if the appliance is lifted at the
rear (tipped forward slightly).
63