Miele F 1913 SF Kurulum Talimatları Kılavuzu - Sayfa 24

Buzdolabı Miele F 1913 SF için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele F 1913 SF 33 sayfaları.

Plumbing

Connecting the water supply

When connecting the water pipe to

the solenoid valve of the appliance,

follow the instructions supplied by

the manufacturer of the ice cube

maker installation kit.

When bending the water pipe, be sure

not to kink it, otherwise there is a risk of

leaks and water damage.

Use bending aids.

^ Remove the cap from the appliance

connection, 1.

^ Bend the water pipe to suit the

location of the connection on the

appliance, 2.

^ Push the union nut and seal onto the

water pipe.

^ Push the end of the water pipe into

the appliance connection and screw

on the union nut, 3. First tighten by

hand.

^ Then use an open-ended wrench to

tighten the union nut. Do not over

tighten.

^ Open the shut-off valve and the main

water connection. Check for leaks at

the connection for the shut-off valve

and to the appliance.

^ Turn the appliance on.

After a maximum of 10 hours the first

ice cubes will drop out of the ice

cube maker and collect in the ice

cube container.