Miele K 12820 cs Çalıştırma ve Kurulum Talimatları - Sayfa 30
Buzdolabı Miele K 12820 cs için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele K 12820 cs 44 sayfaları. Refrigerator with dynamiccooling
Sayfayı Yazdır
Electrical connection
Electrical connection
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
local and national safety regulations.
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an AC single phase
220-240 V 50 Hz supply.
The voltage and frequency are given on
the data plate. Please ensure that these
match the household mains supply. The
fuse rating is quoted on the plug.
Connection should be made via a
suitable switched socket which is easily
accessible. For extra safety it is
advisable to install a suitable residual
current device (RCD).
Do not connect the appliance to the
mains electricity supply by an extension
lead or a plug adapter. Extension leads
do not guarantee the required safety of
the appliance (e.g. danger of
overheating).
Do not connect the machine to an
inverter such as those used with an
autonomous energy source e.g. Solar
power.
When switched on, peak loads in the
system can cause the safety switch off
mechanism to be triggered. This can
damage the electronic unit.
The machine must not be used with
so-called Energy saving devices
either. These reduce the amount of
energy supplied to the machine,
causing it to overheat.
30
WARNING
THIS APPLIANCE MUST BE
EARTHED