Miele K 12820 SD edt/cs Çalıştırma ve Kurulum Talimatları - Sayfa 34
Buzdolabı Miele K 12820 SD edt/cs için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele K 12820 SD edt/cs 44 sayfaları. Refrigerator with dynamiccooling
Ayrıca Miele K 12820 SD edt/cs için: Çalıştırma ve Kurulum Talimatları (48 sayfalar)
Sayfayı Yazdır
Changing the door hinging
The appliance is supplied with
right-hand door hinging. If left-hand
door hinging is required, the hinging
must be changed.
To change the door hinging, you will
need the following tools:
– a Phillips head screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed to change
the door hinging.
Removing the door handle
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate
(see arrow).
^ Undo the 4 (Torx 15) screws in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
34