Miele KF 888 iDN-1 Çalıştırma ve Kurulum Talimatları - Sayfa 40
Buzdolabı Miele KF 888 iDN-1 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KF 888 iDN-1 48 sayfaları. Fridge - freezer combination with dynamic cooling
Sayfayı Yazdır
Changing the door hinging
Before building the appliance in decide
on the door hinging. If left hand door
hinging is required follow these
instructions.
^ Pull covers a and b off.
^ Open out fixing bracket f and
unscrew it. It is used later on the
other side for securing the appliance
into the housing niche.
^ Use a pointed instrument to take off
cover e.
^ Half unscrew the outer screw d and
completely unscrew the inner screw
on hinge plate c. This will make the
appliance door easier to take off.
40
^ Open the upper door of the
appliance a little, and push it
upwards and outwards a little
together with hinge plate c. Then lift
the appliance door upwards and off.
^ Pull hinge plate a and hinge pin b
out of the appliance door, turn hinge
plate a around, and refit everything
on the other side of the appliance
door. Do not forget to use washer c.
^ Use a pointed instrument to take
cover g off.
^ Remove hinge pin d, tilt the lower
appliance door and take it off.
^ Use a screwdriver to remove plug j.
^ Replace the lower hinge pin i
together with its washer h on the
other side.