Miele KFN 14943 SD ed Kurulum Talimatları Kılavuzu - Sayfa 8
Buzdolabı Miele KFN 14943 SD ed için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele KFN 14943 SD ed 19 sayfaları. Combination
Ayrıca Miele KFN 14943 SD ed için: Çalıştırma ve Kurulum Talimatları (18 sayfalar)
Sayfayı Yazdır
Changing the door hinging
^ Remove cover d.
Now the soft-close mechanism and the
appliance are no longer connected.
^ Remove panel a.
^ Push the shock absorber arm f as
far as possible towards the handle
side.
^ Loosen the screws g on the
soft-close mechanism and the
spacer.
^ In the middle, pry out the housing
with the soft-close mechanism using
a flathead screwdriver.
^ Then, pry the housing with the
soft-close mechanism out of the
retainer from the appliance side.
^ Put the soft-close mechanism aside.
^ Push the spacer out towards the
hinge side.
^ Put the spacer aside.
54
Removing the top door of the
appliance:
^ Loosen the cover h by carefully
sliding a flathead screwdriver from
below into the recess.
^ Remove the cover h together
with?the mounting bracket i.
^ Loosen the mounting bracket i from
the cover h by pushing it slightly to
the left and then removing the cover
plate towards the front.
^ Turn the mounting bracket i 180°.
^ Place the cover h on the front of the
mounting bracket i and push it to
the right. The writing must be visible.
^ Unscrew the bearing j mechanism,
turn it 180° and replace it on the
opposite side. If necessary,
pre-punch the screw holes.
^ Remove the top cover k by pushing
it from back to front and lifting it up.
^ Remove cover l upwards.