Miele KFN 8992 SD ED Çalıştırma ve Kurulum Talimatları - Sayfa 41
Buzdolabı Miele KFN 8992 SD ED için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KFN 8992 SD ED 44 sayfaları. Frost free fridge freezer with dynamic cooling
Ayrıca Miele KFN 8992 SD ED için: Çalıştırma ve Kurulum Talimatları (48 sayfalar)
Sayfayı Yazdır
^ Remove cover g, and unscrew hinge
bracket h.
^ Fit hinge pin i in the second hole of
hinge bracket h.
^ Refit bracket j and cover k turned
through 180° on the opposite side.
^ Screw hinge bracket h into the
opposite side.
The M4 screw has to be screwed into
the left hole of the hinge bracket.
^ Turn cover g through 180°, and fit it
on the other side.
^ Exchange cover l in the middle of
the appliance with hinge bracket m.
To do this:
Unscrew cover l and hinge bracket
m, turn them around and screw in on
the opposite side.
^ Pull bearing bush n downwards out
of hinge bracket m and refit it from
above into the hinge bracket.
^ Remove the plugs from the door
bearing bushes in the top of the
doors and refit on the opposite side.
Changing the door hinging
^ Hang the upper appliance door on
hinge pin i and close the appliance
door.
^ Push middle hinge pin e from below
through hinge bracket m into the
upper appliance door.
^ Check that the upper door is
correctly aligned. If necessary, align
it using the long slots in hinge
bracket m.
^ Hang the lower door on hinge pin e
and then close the appliance door.
^ Fit lower hinge bracket b in the door
bearing bush of the lower door. Then
screw it securely to the housing.
^ Refit cover a.
41