Miele KFN 9753 ID Çalıştırma ve Kurulum Talimatları - Sayfa 10

Buzdolabı Miele KFN 9753 ID için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KFN 9753 ID 22 sayfaları.

Removing the door closing device

^ With its exterior facing downwards,

place the appliance door on a stable

surface.

^ Leave the hinges open and remove

the screw in the mounting a.

Caution! When uninstalled, the door

closing device will snap shut.

^ Loosen the ball joint b using an

open ended wrench.

^ Remove the door closing device c

together with the ball joint.

Do not remove the door closing

device from the ball joint!

This will damage the device.

Adjusting the door hinges

^ Stand the appliance doors up

individually, and loosen the hinges on

the front (hinges remain open).

^ Pull out the plugs a from the top,

middle and bottom (if the plugs are

not in the doors, the are included

separately in the packaging).

^ Remove the screws from all the

hinges b.

^ Relocate each hinge diagonally in the

opposite corner.

Do not close the hinges.

Risk of injury!

^ To tighten the hinges, use a power

screwdriver – the screws b are

self-tapping.

^ Use the plugs a to close the holes

on the opposite side.