Allnet ALL168255 Hızlı Kurulum - Sayfa 9

Ağ Yönlendiricisi Allnet ALL168255 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Allnet ALL168255 12 sayfaları. 500 mbps plc ethernet bridge

Sayfayı Yazdır

NID/RST Button Usage:

1. Set 2nd device into same group (private network):

Step 1. Press and hold the device's "NID/RST" button for less 3 seconds at same time. You can then

release the button and this device would join into the same private network.

2. Add a new device to the existing private network:

Step 1. Plug in the new device and one already grouped device. Press and hold its "NID/RST " button

less 3 seconds at same time.

Step 2. The new device starts to communicate with the device from existing private network, and tries

to join this existing private network.

Step 3. If the process failed, please repeat Step 1 to Step 2 again.

3. Leave the private network:

Step 1. If you want the device to leave the existing private network, press and hold the device's "NID/

RST" button for 5-10 seconds to randomize the network encryption setting. This device will

then not be connected to the private network any more.

4. Reset the device to the factory default setting:

Push the device's "NID/RST" button for 10-15 sec seconds. You will see the device's LEDs are all

turning off and the device will restart. The device's setting resets to the "factory defaults".

ALL168255 Quick Installation Guide

ALL168255 QIG English

Page 9