Allnet ALL7000 Hızlı Kurulum Kılavuzu - Sayfa 12

Ağ Yönlendiricisi Allnet ALL7000 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Allnet ALL7000 16 sayfaları. Load balancing router with / mit dmz

Sayfayı Yazdır

WEBUI Configuration example

Step 1:

Connect both the Administrator's PC and the LAN port of the ALL7000 to a hub or

switch. Make sure there is a link light on the hub/switch for both connections. The

ALL7000 has an embedded web server used for management and configuration. Use

a web browser to display the configurations of the Multi-Homing (such as Internet

Explorer 4(or above) or Netscape 4.0(or above) with full java script support). The

default IP address of the ALL7000 is 192.168.1.1 with a subnet mask of

255.255.255.0. Therefore, the IP address of the Administrator PC must be in the

range between 192.168.1.2 /24– 192.168.1.254/24.

If the company's LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP Address

is 172.16.0.1) the Administrator must change his/her PC IP address to be within the

same range of the LAN subnet (i.e. 172.16.0.0). Reboot the PC if necessary.

By default, the ALL7000 is shipped with its DHCP Server function enabled. This

means the client computers on the LAN network including the Administrator PC can

set their TCP/IP settings to automatically obtain an IP address from the ALL7000.

The following table is a list of private IP addresses. These addresses may not be

used as an WAN IP address.

10.0.0.0 ~ 10.255.255.255

172.16.0.0 ~ 172.31.255.255

192.168.0.0 ~ 192.168.255.255

ALL7000

Quick Installation Guide / Express Setup

- 12 -