Miele CS 10121 G Çalıştırma ve Kurulum Talimatları - Sayfa 35

Setüstü Ocak Miele CS 10121 G için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele CS 10121 G 44 sayfaları. Gas combiset

Installing the appliance /

appliances

^ Feed the power cord down through

the cut-out.

^ Place the front edge of the appliance

into the cut-out.

^ With a hand on each side of the

appliance press down evenly on the

edges until it clicks into position.

When doing so make sure that the

appliance seal sits tightly on the

countertop to ensure it is sealed

correctly. This is important to ensure

an effective seal. Do not permanently

seal into the countertop.

When installing more than one

appliance, a sealing strip must be

inserted into the support bar.

^ Push the installed appliance to the

side until the slots in the support bar

are visible.

^ Insert the sealing strip d into the

slots in the support bar b.

^ Place the front edge of the next

appliance into the cut-out.

^ Connect the appliance / appliances

to the main power supply (see

"Electrical connection").

^ Turn the appliance / appliances on

and check the function.

The appliance may be lifted out

using a special tool.

The appliance can also be pushed

up and out from underneath.

Note: push the rear out first.

If the appliance is accessible from

below, it can be pushed up and out of

the cut-out. Push up from the back first.

If the appliance is not accessible from

below, grip the appliance with both

hands at the back, pull forward, then lift

it up and out.

Installation