Miele CS 1223 Çalıştırma ve Kurulum Talimatları - Sayfa 21

Setüstü Ocak Miele CS 1223 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele CS 1223 44 sayfaları. Induction wok
Ayrıca Miele CS 1223 için: Çalıştırma ve Kurulum Talimatları (40 sayfalar), Çalıştırma ve Kurulum Talimatı (48 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar), Çalıştırma ve Kurulum Talimatları (40 sayfalar)

Overheating protection

The induction coil is equipped with

overheating protection. Before the

induction coil gets too hot, overheating

protection cuts in in one of the following

ways:

– If the booster function is being used

it will be switched off.

– If the temperature continues to rise

after the booster function is switched

off, the power setting will be

reduced.

– If the temperature continues to rise

after the power setting has been

reduced, the induction wok will

switch off and H will appear in the

display.

^ Turn the control to "0".

The induction wok can only be used

again in the normal way after the H has

gone out.

If the control is not turned back to "0", C

and 0 will flash in the display alternately

once the induction wok has cooled

down sufficiently. To use the induction

wok again, first turn the control to "0".

The induction coil can overheat if

– the appliance is used for too long at

maximum power.

– the appliance is not well enough

ventilated.

If a drawer is fitted directly underneath

the hob, there must be sufficient space

between the drawer and its contents

and the underside of the appliance in

order to ensure sufficient ventilation for

the induction wok.

If the overheating protection device

trips again, contact the Service

department.

Safety features