Miele GAS COMBISET CS 1012 Ürün Boyutları - Sayfa 3

Setüstü Ocak Miele GAS COMBISET CS 1012 için çevrimiçi göz atın veya pdf Ürün Boyutları indirin. Miele GAS COMBISET CS 1012 4 sayfaları. Double gas combiset
Ayrıca Miele GAS COMBISET CS 1012 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar), Dönüştürme Talimatları (40 sayfalar)

Sayfayı Yazdır

Miele GAS COMBISET CS 1012 Ürün Boyutları

Product and Cut-out Dimensions

CS 1012 Double Gas CombiSet

The illustration above represents the attachment of spring clips 1 and support bars 2 for 3

appliances

An additional support bar is required for each additional appliance. The position for the

attachment of an additional support bar depends on the width of appliance B.

Location Codes

1 – Spring Clips

2 – Support bars (Accessory, item - 27996029D CSZL 1500 (Includes cover 4))

Support bars (Accessory item 27996029D CSZL 1500 (Includes cover 4))

3 – Space between support bar and countertop

4 – Cover

Notes

All installations must be done in accordance with local codes.

Drawing is not to scale

Spring Clip installation

on wood or solid

surface countertop

Place the supplied

spring clips 1 and the

support bars 2 at the

marked positions as

shown above, by

laying them on the

upper edge of the cut-

out and then securing

them with the 1/8" x 1"

(3.5 x 25 mm) screws

(supplied)

Specification Sheets OJS 02212012

Page 3 of 4

Spring Clip installation

on a granite

countertop

Position and attach

the spring clips 1 and

the support bars 2

with strong double-

sided tape 3

Coat the side and

lower edges of the

spring clips with

silicone.

Fill the space between

the support bars and

the countertop with

silicon