Miele KM 5676 Çalıştırma ve Kurulum Talimatları - Sayfa 40
Setüstü Ocak Miele KM 5676 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KM 5676 44 sayfaları. Ceramic cooktop
Ayrıca Miele KM 5676 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar), Teknik Özellikler (7 sayfalar), Ürün ve Kesim Ölçüleri (1 sayfalar), Kullanım Talimatları Kılavuzu (44 sayfalar)
Sayfayı Yazdır
Electrical connection
,
CAUTION: Before installation or
servicing, disconnect the power
supply by either removing the fuse,
shutting off the power main or
manually "tripping" the circuit
breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer will not be held
responsible.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage. Consult an
electrician if in doubt.
Only operate the cooktop after it has
been installed into the countertop.
Installer:
Please leave these instructions with
the consumer.
Power supply
^ Make sure your electrical supply
matches the data plate.
40
Connection
The cooktop is equipped with a flexible
power cord consisting of 3 wires ready
for connection to a grounded power
supply.
208 V, 60 Hz, 50 A fuse rating.
240 V, 60 Hz, 40 A fuse rating.
Black wire: connect to L1 (hot)
Red wire:
connect to L2 (hot)
Green wire: connect to GND (ground)
A dedicated line and junction box
should be used to connect the cooktop
to a 50 A circuit (208 V model) or to a
40 A circuit (240 V model).
For further information, see the wiring
diagram provided with the appliance.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED!