Allnet ALL168207 Hızlı Kurulum Kılavuzu - Sayfa 5
Adaptör Allnet ALL168207 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Allnet ALL168207 12 sayfaları. Coaxial network adapter
Sayfayı YazdırALL168207 Coaxial Network Adapter
Product installation guide
To install PC local network and transmit data via coaxial cable:
1.
Use the supplied Cat 5 Ethernet cable to connect the Coaxial Ethernet Bridge's RJ45 connector and your PC's
Ethernet port.
2.
Use the coaxial cable to connect the Coaxial Ethernet Bridge's F Connector and a coax jack on the wall.
3.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
4.
The Power LED indicator will light on after plugged to outlet.
5.
You can repeat steps 1 to 4 for connecting as many other links depending on your needs
6.
The COAX/ACT LED indicator starts blinking when the data communication proceeds on coaxial cable.
7.
The ETH/ACT LED indicator starts blinking when the data communication proceeds on Ethernet.
To share an xDSL with Internet access service via coaxial cable:
1.
Connect one Ethernet Bridge to broadband router
Plug the provided Ethernet cable into the RJ45 connector of the Coax Ethernet Bridge and plug the
other end of the cable into an available Ethernet port of the Router.
Use coaxial cable to connect the Coaxial Ethernet Bridge's F Connector and a coax jack on the wall.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
The Power LED indicator will light on after plugged to outlet.
Coaxial Ethernet
Bridge
Follow up the above section "To install PC local network and transmit data via coaxial cable" to install your
2.
PC connection via coaxial cable. You will be able to access Internet through coaxial cable.
© 2008. All rights reserved.
Coaxial Ethernet
Bridge
To Power outlet
Coax jack on the wall
To Power outlet
Coax jack on the wall
P
RODUCT
PC
DSL/Cable Modem
I
G
NSTALLATION
UIDE
.
et
Intern
Networ
k
Page 5