ALLNIC AUDIO L-6500 Kullanıcı El Kitabı - Sayfa 6
Amplifikatör ALLNIC AUDIO L-6500 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ALLNIC AUDIO L-6500 14 sayfaları. Line-stage preamplifier
Sayfayı Yazdır
3)
Be sure the L-6500 is labeled for the AC voltage of your location. If it is not, DO
NOT connect it to your AC outlet. Please contact your Allnic dealer.
We advise that you keep the box and other packing materials that your L-6500 came in. It will be
useful if you sell your L-6500 or in the unlikely event you need to ship it for service.
SAFETY
•
CAREFULLY and SLOWLY remove ALL cardboard and Styrofoam cushioning material inside
the tube chimneys before operation.
•
Disconnect the power cord by pulling the plug, not the cable.
•
Keep the power cord away from any heat source.
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any
condensation to evaporate before plugging the unit into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the chassis cover without specific authorization from your Allnic dealer.
•
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis and glass
Use only a soft, lint-free cloth dampened slightly with water only (NO cleaning fluids!) to clean
the faceplate, meter glass and chassis.
B.
Connectors
You may use any good quality contact cleaner recommended for such applications to clean the
contacts from time to time as you deem appropriate.
INITIAL SET-UP
A.
LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio L-6500 needs to be placed on a solid stand
in a location that provides for good air circulation around the preamplifier.
•
DO NOT cover the top of the preamplifier.
•
DO NOT place the unit on carpet or foam.
•
DO NOT subject the unit to knocks and shocks as you move it around. This advice is
meant particularly for those who may want to place the L-6500 on a set of after-market
isolation feet or similar devices. Dropping one side of the L-6500, or the whole unit, is
not a good thing.
•
DO NOT place the unit near a strong light or heat source.
•
DO NOT place anything heavy on the unit.
•
DO NOT allow rubber or vinyl materials to rest on the unit's chassis for long periods of
time. This could discolour the metal.
•
DO place the unit on a shelf or stand that is stable and not subject to vibration or
sudden shock.
6