DiaLFonZo-Copter V-Tail Hunter 400 Montaj Kılavuzu - Sayfa 2
Dronlar DiaLFonZo-Copter V-Tail Hunter 400 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. DiaLFonZo-Copter V-Tail Hunter 400 8 sayfaları. Frame referance
Sayfayı Yazdır
DiaLFonZo V-Tail
DiaLFonZo-Copter V-TAIL HUNTER 400/500 Assembly Guide (3/27/13)
Thank you for purchasing a DiaLFonZo-Copter frame from dialfonzo-copter.com.
There are a few different ways how to assemble your copter, but this assembly guide is
designed to iron out any potential problems you may have while assembling your
DiaLFonZo-Copter V-Tail HUNTER 400/500. We want you to feel comfortable while
building your frame, and by familiarizing yourself with the Frame Parts, you should have
an easier advantage. Identify all the parts and any potential miss-haps, (like that will
ever happen) during the manufacturing or packaging stage. Laying out the sections and
screws into groups will also help.
We are certain you will be happy with your new frame.
PARTS INCLUDED WITH YOUR KIT (Standard kit)
G10 PARTS:
x6 VTail– Arm Reinforcement
x1 VTail– Cross Brace
x2 VTail– Brace Support
x1 VTail– Centre Bottom
x1 VTail– Centre Protect (Optional)
x1 VTail– Centre Top
x2 VTail– Front Bottom Arm Plate
x2 VTail– Front Top Arm Plate
x6 VTail– Landing leg
x2 VTail– Rear Arm Plate
x2 VTail– Rear Bottom Motor Mount Plate
x2 VTail– Rear Top Motor Mount Plate
x2 VTail– V Part
HARDWARE: (Additional spares may be supplied)
31 x 0.5" standoffs
4 x 0.25" standoffs (To secure your flight controller)
56 x 1/4" 4-40 hex screws
14 x 5/16" 4-40 hex screws
14 x 4-40 nylon lock nuts
The assembly of your frame will start out by building some of the components needed
with the rest of the assembly later on. This way we insure you don't then forget any
small details or forget something and have to go back and disassemble anything
Rev 1