Dialog DA16200 Kullanıcı Kılavuzu - Sayfa 6

Bilgisayar Donanımı Dialog DA16200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dialog DA16200 20 sayfaları. At gui tool

DA16200 AT GUI Tool

2.2

Setup Serial Terminal Utility

Users can control DA16200 by using a serial terminal tool (e.g. Teraterm or SecureCRT) and the

following configurations are required to connect to the console of DA16200.

●

Port: Com port number on Windows system

●

Baud rate: 115,200 bps

●

Data bits: 8 bits

●

Parity: None

●

Stop bits: 1 bit

●

Flow control: None

When the DA16200 board is connected, two COM ports will be detected on the Window machine.

One (UART0) is for console command and the other (UART1) is for AT command. Normally, the

large number COM port is for the AT commands and higher number COM port is for the console.

User Manual

CFR0012

Revision 1.0 DRAFT

6 of 20

03-Jul-2019