Alloy Network Device BWS-136 Kullanıcı Kılavuzu - Sayfa 9

Medya Dönüştürücü Alloy Network Device BWS-136 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alloy Network Device BWS-136 18 sayfaları. Alloy computer products network device user manual

Sayfayı Yazdır

Serial and Data Packing Settings

The group of setting is to configure the serial interface and data

packing settings. Data Packing setting is are as follow:

Length: Pack the length of serial data before forwarding data to

Ethernet port

Timeout: the period of time to forward data to Ethernet Port

Delimiter: Wait for the Delimiter Character before forwarding

data to Ethernet port. The Delimiters are maximum two bytes

Hex format ASCII code. If you use Carriage Return (CR) and Line

Feed (LF) as delimiters, you can specify 0D0A or 0d0a.

TCP/IP Network Settings

The group of TCP/IP Network settings are configuring the IP

Address, TCP port and operation mode as follow:

OpMode: TCP operation mode setting

TCP Port: TCP Port number of BWS-136

Destination IP: The IP address of remote host which BWS-136

will actively connect to (TCP Client mode only)

Connect At:

means TCP connection is established when

Startup

system starts (TCP Client mode only)

Timeout: When this option is checked, TCP connection will be

disconnected if there is no serial data activity before timeout

IP Mode: Configure the IP Address to be Static IP or Dynamic IP

by DHCP

BWS-136 User Manual_amend.doc

- 17 -

IP Address: Set the Static IP Address

Subnet Mask: Subnet Mask setting

Gateway: Gateway address setting

Device Name Settings

Click Edit Device Name button can edit the device name

Access Control Settings

BWS-136 provides IP address filtering method and password

authentication for access control

BWS-136 User Manual_amend.doc

- 18 -