Dialog Semiconductor DA9070 Kullanıcı Kılavuzu - Sayfa 10

Kontrolör Dialog Semiconductor DA9070 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dialog Semiconductor DA9070 18 sayfaları. Fuel gauge development kit

Sayfayı Yazdır
UM-PM-039
DA9070 / DA9231 Fuel Gauge Development Kit

Recommended Operating Conditions

Table 1: Recommended Operation Conditions

Parameter
Description
VDD_PWR
VDD_PWR voltage
VDD_PWR
operating voltage
VBAT
Battery voltage
Battery voltage
VDD_LDO
VDD_LDO voltage
VDDIO
IO voltage
I_PWR
VDD_PWR current
I_BAT
Battery discharge
I_SYS
VDD_SYS current
I_LDO
LDO output current
I_BUCK
Buck output current
I_BOOST
Boost output current

Connectors for DA9070 Evaluation

Table 2: DA9070 Input and Output Connectors

Connectors
Pin Names
J1
+/ S+/ S-/ -
(VDD_BUCK_M)
J2
(IBAT)
J3
+/ S+/ S-/ -
(VDD_BST)
J6
(IMON)
J9
VDD_LDO0/
VDD_SYS_M
(LDO_0)
J10
VDD_LDO1/
User Manual
Conditions
Including OVP range
VDD_PWR supplied
VDD_PWR not supplied
Load switch mode
LDO mode
VDDIO < VDD_PWR or
VBAT, whichever is
greater
12Vout, 2.7VBAT
Descriptions
+ and - are terminals for connecting an external load
to the DA9070 VDD_SYS; S+ and S- are kelvin
sense points for DA9070 Buck input. For input
voltage measurement during efficiency test, S+ and
S- should connect to multi-meter for better accuracy.
Install J2 jumper will connect the VBAT pin of
DA9070 to battery positive terminal VBAT_P through
current sense shunt resistor. It also enables battery
current monitoring using external current probe.
+ and - are terminals for connecting external power
supply to the Boost input; S+ and S- are kelvin sense
points for the Boost input. For input voltage
measurement during efficiency test, S+ and S- should
connect to multi-meter for better accuracy.
Install J6 jumper will connect the IMON pin of
DA9070 to STM32L151(U8) ADC input. It also
enables IMON current measurement using external
multi-meter. Position 2-3 should be used.
Install J9 jumper will connect LDO_0 input
(VDD_LDO0) to VDD_SYS_M of DA9070.
Install J10 jumper will connect LDO_1 input
Revision 2.1
10 of 18
NDA Confidential
Min
Typ
Max
3.6
5
20
3.6
5
5.5
0
3.7
4.7
2.8
3.7
4.7
0.8
5.5
1.8
5.5
1.4
1.8
3.3
500
800
800
150
300
100
28-Oct-2018
© 2018 Dialog Semiconductor
Unit
V
V
V
V
V
V
V
mA
mA
mA
mA
mA
mA