Alloy Home MH4 Manuel - Sayfa 5
Termostat Alloy Home MH4 için çevrimiçi göz atın veya pdf Manuel indirin. Alloy Home MH4 12 sayfaları. Electrical heating thermostat
Sayfayı Yazdır
OPERATION
On/Off Operation
•
ON: When it displays OFF, slide up the ON/OFF button to turn it on. Local time, the
corresponding temperature, working mode and output status will be displayed on
the screen.
•
OFF: In normal working interface, slide down the ON/OFF button to turn it off. It
will display OFF on the screen and all outputs will be closed.
GFCI Test
1 - Set the thermostat to heating mode. Adjust the set point to make sure the heater
engages.
2 - Press the GFCI button. Observe the GFCI icon displays on the screen, the heater shuts
off and the indicator light is on. If not, replace the thermostat.
End GFCI test: Slide the ON/OFF button to OFF and then to ON. The device will resume
normal operation.
Note: There is an electric leakage protector inside the thermostat. It is used to protect
the operator from electric shock when the system is damaged.
Local Time Setting
In shutdown mode, long press
The blinking icon is the current modifiable item, press
values; press
button to switch the setting value. Then press
button to enter into the Time settings interface.
or
button to set the
button to confirm