Dialogic 2000 Series Kurulum ve Yapılandırma Notu - Sayfa 5
Ağ Geçidi Dialogic 2000 Series için çevrimiçi göz atın veya pdf Kurulum ve Yapılandırma Notu indirin. Dialogic 2000 Series 17 sayfaları. Media gateway
Ayrıca Dialogic 2000 Series için: Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
Connecting to Console Port
Serial:
Connect to the COM 2 port on the DMG2000 using an appropriate program, such as HyperTerminal.
The serial port configuration is:
Baud rate:
Data Buts
Stop Bits:
Parity:
Flow Control:
Serial Port Pin Out
Pin
Ethernet:
Default DMG2000 IP address: 10.12.13.74
Change the IP address of your computer to be in the same subnet as the default. Telnet into the DMG2000 and
then follow the commands noted below:
Running QuickCFG
Press Enter key until you get to the "PIMG" prompt. Follow the steps below and modify the settings in
match your environment. The values in bold are what you will be entering.
115200
8
1
none
none
Signal
1
Data Carrier Detect
2
Transmit Data
3
Receive Data
4
Data Terminal Ready
5
Signal Ground
6
Data Set Ready
7
Clear to Send
8
Request to Send
9
Ring Indicator
®
Dialogic
2000 Media Gateway Series Installation and Configuration Note
red
to
5