Dialogic IMG 1010 Hızlı Başlangıç Kılavuzu - Sayfa 7

Ağ Geçidi Dialogic IMG 1010 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dialogic IMG 1010 18 sayfaları. Connecting dc power
Ayrıca Dialogic IMG 1010 için: Kurulum Talimatları Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (11 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Kurulum Talimatları Kılavuzu (9 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Connecting Power

If the IMG 1010 purchased is powered by an AC voltage then the AC input power must

conform to the specifications in the table below.

Input

Vin (voltage)

Vin (Frequency)

Iin (90 VAC)

Iin (180 VAC)

Heat Dissipation

Complete the following steps to connect AC power to the chassis.

1. Plug AC cable into the receptacle on the AC power module.

2. Insert other end into a grounded wall outlet, uninterruptible power supply (UPS), or

surge protector.

3. Press switch on the AC power module to I (On).

Warning! Do not attempt to modify or use the supplied AC power cord if it is not the exact

type required.

AC Power Module

The AC power docking station provides an AC input power module with an integrated fuse,

power switch, and standard three position female AC input connector. This connector allows

the docking station to interface with all variations of AC outlets by simply using a standard

power cable and compatible outlet plug.

For more information regarding AC Power, please refer to the topic IMG 1010 – Connecting

AC Power in the

online

Min

90 VAC rms

47 Hz

documentation.

IMG 1010 Quick Start Guide

Max

264 VAC rms

63 Hz

1.25 amps rms

.65 amps rms

307 BTUs/hr