Dialogic IMG 2020 Hızlı Başlangıç Kurulum Kılavuzu - Sayfa 3
Ağ Geçidi Dialogic IMG 2020 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kurulum Kılavuzu indirin. Dialogic IMG 2020 3 sayfaları. Integrated multimedia gateway
Sayfayı Yazdır
®
Dialogic
IMG 2020 Integrated Multimedia Gateway Quick Start Installation Guide
Connecting to the Network
Complete the following steps to connect the 2020 IMG to the network:
1. Access the online WebHelp at http://www.dialogic.com/manuals/img/img1.1.aspx.
2. Refer to the Installing the Software section in the online WebHelp.
3. Review the options for installing the software and choose the appropriate installation
method for your site.
4. Install the software.
5. Follow the instructions for configuring the IP address and setting the system software
file name as described in the online WebHelp.
6. Using a shielded Ethernet cable, connect CTRL 0 or CTRL 1 to your network Ethernet
switch. Use the CTRL Ethernet connectors on the rear of the 2020 IMG for network
management.
Depending on the configuration, the binary downloads from either an SD card or from an
FTP server that you configured. Once the binary downloads, you can begin the configuration
as described in the online WebHelp. You will connect the remaining cables as you configure
the system.
3
Document P/N: 64-1103-02