Dialogic DM3 Fax Boards DM/F240-1T1-PCI Hızlı Kurulum Kartı - Sayfa 2

Ağ Kartı Dialogic DM3 Fax Boards DM/F240-1T1-PCI için çevrimiçi göz atın veya pdf Hızlı Kurulum Kartı indirin. Dialogic DM3 Fax Boards DM/F240-1T1-PCI 2 sayfaları. Dm3 fax boards quick install card for pci

Sayfayı Yazdır

4. If you are not installing your board in an ISA form

factor PCI slot, remove the ISA edge retainer from the

board.

5. Using the slot's board guides, insert the edge connector

of the board into the bus slot. Press firmly until the

board is securely seated in the slot.

Installing a PCI Board

Remove

Cover

Plate

Computer

Chassis

PCI Slot

ISA Slot

6. Replace and tighten the retaining screw to secure the

board firmly in the chassis slot (if applicable).

7. Connect external digital telephone cable to the RJ-48C

jack on the board bracket.

Connecting to the RJ-48C Jack

Pinouts for t he RJ048C

Network Interface

Jack on Bracket

Cable Connector

CHASSIS GROUND

Pin 1

CHASSIS GROUND

XMIT_TIP

XMIT_RING

CHASSIS GROUND

RCV_TIP

RCV_RING

8. Select a new PCI slot and repeat steps 3-7 for each

board you are installing.

9. Use the CT Bus cable to connect the board(s) you are

installing to other boards in the system.

NOTE: Your system may include both CT Bus and SCbus

boards. To connect both board types, you must install a CT

Bus/SCbus Adapter on one of the CT Bus boards in a

system. See the CT Bus/SCbus Adapter Quick Install Card

for installation details about the Adapter and the bus

cables. Contact your sales representative to order an

Adapter.

10. Install CT Bus Termination Jumpers only on boards

located at each end of the CT Bus cable. See Physical

Description.

11. Replace the computer cover when finished and reconnect

the power cords.

Installing the CT Bus Cable

PCI

Board

12. Turn the power to the chassis ON.

CAUTION: If your BIOS is set to use Plug and Play

technology and there are ISA boards in your system, an

IRQ conflict can be created if a DM3 board is assigned

the same IRQ as an ISA board. This could cause the

machine to stop responding. You can prevent this by

entering the BIOS and reserving the appropriate IRQs

(those used by your ISA boards) for ISA use only.

After Installing the

After installing the hardware, proceed with the system

software installation as described in the Dialogic

Software documentation (if applicable).

For technical specifications and product information go to:

http://www.dialogic.com/products.htm.

Warranty and Return

For specific warranty information for this board, refer to the

Warranty section of the Products page, located at this URL:

http://www.dialogic.com/warranties/.

Dialogic provides technical support for its products through a

network of value added distributors who are trained to answer

technical questions on installing and configuring Dialogic

products. If you are unsure how to contact your support

channel, please call Dialogic in the United States at 973-967-

6600 (9am-5pm EST) and we will assist in obtaining the

appropriate support channel. Outside the United States please

refer to http://www.dialogic.com/support/contact to obtain

local contact information.

Dialogic also provides direct support via Dialogic

Services agreements. For more details of direct support from

Dialogic please refer to:

CT Bus

Colored

Cable

Stripe

(Pin 1)

Note:

Your CT Bus cable may

have a different number

of connectors (drops).

Hardware

System

Information

Warranty Period

Contacting Technical Support

Pro™

http://www.dialogic.com/support/DialogicPro.

Returning a Product

To return a board for warranty repair or any other returns,

please refer to the following:

http://www.dialogic.com/support/hwfaults.

To return a board for warranty repair, please refer to the

following: http://www.dialogic.com/support/hwfaults. For all

other returns, contact your vendor or Dialogic Customer

Support (for more information, see

http://www.dialogic.com/support/contact/ ).

Sales Assistance

If you have a sales question, please contact your

local Sales Representative or the Regional Sales Office

for your area. Address, telephone and fax numbers, are

available at the Dialogic website located at:

http://www.dialogic.com/contact.htm.

To purchase Dialogic

products, please refer to the following

website to locate the appropriate supplier.

http://www.dialogic.com/purchase.htm.

All contents of this document are furnished for informational use only and are subject to change without notice

and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries ("Dialogic").

Reasonable effort is made to ensure the accuracy of the information contained in the document. However,

Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors,

inaccuracies or omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC

PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY

INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED

IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY

WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING

TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES

RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT

OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety

systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this

document, in marketing collateral produced by or on web pages maintained by Dialogic may infringe one or

more patents or other intellectual property rights owned by third parties. Dialogic does not provide any

intellectual property licenses with the sale of Dialogic products other than a license to use such product in

accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided

except pursuant to a signed agreement with Dialogic. More detailed information about such intellectual property

is available from Dialogic's legal department at 9800 Cavendish Blvd., 5

H4M 2V9. Dialogic encourages all users of its products to procure all necessary intellectual property

licenses required to implement any concepts or applications and does not condone or encourage any

intellectual property infringement and disclaims any responsibility related thereto. These intellectual

property licenses may differ from country to country and it is the responsibility of those who develop the

concepts or applications to be aware of and comply with different national license requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard , Dialogic Pro and SIPcontrol, among others, are either

registered trademarks or trademarks of Dialogic. Dialogic's trademarks may be used publicly only with

permission from Dialogic. Such permission may only be granted by Dialogic's legal department at 9800

Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks

will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of

Dialogic's trademarks requires proper acknowledgement. The names of actual companies and products

mentioned herein are the trademarks of their respective owners.

Floor, Montreal, Quebec, Canada