Dialogic DMV160LPEU Hızlı Kurulum Kartı - Sayfa 2

Ağ Kartı Dialogic DMV160LPEU için çevrimiçi göz atın veya pdf Hızlı Kurulum Kartı indirin. Dialogic DMV160LPEU 2 sayfaları. Dm3 media boards quick install card for universal pci boards

Sayfayı Yazdır

Installing the Universal PCI Board

Remove

Cover

Plate

Computer

Chassis

PCI Slot

ISA Slot

7. If desired, use the optional CT Bus cable to connect the

board(s) you are installing to other boards in the system.

Installing the CT Bus Cable

Colored

Stripe

(Pin 1)

NOTE:

Your CT Bus cable may

have a different number

of connectors (drops).

NOTE: Your system may include both CT Bus and

SCbus boards. To connect both board types, you must

install a CT Bus/SCbus Adapter on one of the CT Bus

boards in the system. See the CT Bus/SCbus Adapter

Quick Install Card for installation details about the

adapter and the bus cables. Contact your Dialogic sales

representative to order an adapter and bus cables.

8. Install CT Bus termination jumpers only on boards

located at each end of the CT Bus cable. (If your system

includes CT Bus and SCbus boards, you must also install

termination jumpers at the end of the CT Bus boundary

where the CT Bus and SCbus transition takes place.)

NOTE: CT Bus signals are terminated when both jumper

clips are installed (pin 1 to pin 2, and pin 3 to pin 4).

9. Replace the computer cover when finished and reconnect

the power cords.

Optional Steps When Using RJ-21Q Adapter Cable

and Universal Breakout Box

10. Connect the RJ-25 connectors (P1-P6) on the RJ-21Q

adapter cable to the jacks (J1-J6) on the board bracket.

NOTE: Connect P1 on the adapter cable to J1 on the

board bracket, P2 to J2, P3 to J3, P4 to J4, P5 to J5, and

P6 to J6.

11. If desired, hook up the RJ-21Q connector on the adapter

cable to Jack A on the universal breakout box.

Connecting the Universal Breakout Box

PCI

Board

12. If you performed step 11, then connect each RJ-11 cable

CT Bus

Cable

to jacks 1-16 on the universal breakout box (jacks 17

through 25 are not used). Connect the other end of each

RJ-11 cable to a network line.

You can order these optional parts through your Dialogic

sales representative: RJ-21Q adapter cable (model name

CBL6RJ25TORJ21Q, Dialogic part number 884-292-XX)

and universal breakout box (model name BOB25POSJ11W,

Dialogic part number 882-753-XX).

For your reference, the pinout for J1 through J6 is provided in

the following graphic.

Pinout for J1-J6 on the Board Bracket

After Installing Hardware

After installing the hardware, turn the power to the chassis

ON. Proceed with the system software installation as

described in the system software documentation.

CAUTION: If your BIOS is set to use Plug and Play

technology and there are ISA boards in your system, an IRQ

conflict can be created if a DM3 board is assigned the same

IRQ as an ISA board. This could cause the machine to stop

responding. You can prevent this by entering the BIOS and

reserving the appropriate IRQs (those used by your ISA

boards) for ISA use only. For technical specs and product

information go to: http://www.dialogic.com/products.htm.

Warranty and Return Information

For specific warranty information for this board, refer to the

Warranty section of the Products page, located at this URL:

http://www.dialogic.com/warranties/.

RJ-21X to RJ-25

Adapter Cable

Network Lines

RJ-11

Cables

Jack A

RJ-11 to RJ-21X

Universal Breakout Box

6−−Ring C

5−−Ring B

4−−Tip A

3−−Ring A

2−−Tip B

1−−Tip C

Warranty Period

Dialogic provides technical support for its products through a

network of value added distributors who are trained to answer

technical questions on installing and configuring Dialogic

products. If you are unsure how to contact your support

channel, please call Dialogic in the United States at 973-967-

6600 (9am-5pm EST) and we will assist in obtaining the

appropriate support channel. Outside the United States please

refer to http://www.dialogic.com/support/contact to obtain

local contact information. Dialogic also provides direct

support via Dialogic

Pro™ Services agreements. For more

details of direct support from Dialogic please refer to:

http://www.dialogic.com/support/DialogicPro.

Returning a Product

To return a board for repair or any other returns, please refer

to the following: http://www.dialogic.com/support/hwfaults.

To return a board for warranty repair, please refer to the

following: http://www.dialogic.com/support/hwfaults. For all

other returns, contact your vendor or Dialogic Customer

Support (for more information, see

http://www.dialogic.com/support/contact/ ).

Sales Assistance

If you have a sales question, please contact your local Sales

Representative or the Regional Sales Office for your area.

Address, telephone and fax numbers, are available at the

Dialogic website: http://www.dialogic.com/contact.htm. To

purchase Dialogic

products, refer to the following website:

http://www.dialogic.com/purchase.htm.

All contents of this document are furnished for informational use only and are subject to change without notice

and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries ("Dialogic").

Reasonable effort is made to ensure the accuracy of the information contained in the document. However,

Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors,

inaccuracies or omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC

PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY

INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED

IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY

WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING

TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES

RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT

OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety

systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this

document, in marketing collateral produced by or on web pages maintained by Dialogic may infringe one or

more patents or other intellectual property rights owned by third parties. Dialogic does not provide any

intellectual property licenses with the sale of Dialogic products other than a license to use such product in

accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided

except pursuant to a signed agreement with Dialogic. More detailed information about such intellectual property

is available from Dialogic's legal department at 9800 Cavendish Blvd., 5

H4M 2V9. Dialogic encourages all users of its products to procure all necessary intellectual property

licenses required to implement any concepts or applications and does not condone or encourage any

intellectual property infringement and disclaims any responsibility related thereto. These intellectual

property licenses may differ from country to country and it is the responsibility of those who develop the

concepts or applications to be aware of and comply with different national license requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and SIPcontrol, among others, are either

registered trademarks or trademarks of Dialogic. Dialogic's trademarks may be used publicly only with

permission from Dialogic. Such permission may only be granted by Dialogic's legal department at 9800

Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks

will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of

Dialogic's trademarks requires proper acknowledgement. The names of actual companies and products

mentioned herein are the trademarks of their respective owners.

Floor, Montreal, Quebec, Canada