AllPondSolutions FPP-3000 Manuel - Sayfa 7

Su Pompası AllPondSolutions FPP-3000 için çevrimiçi göz atın veya pdf Manuel indirin. AllPondSolutions FPP-3000 16 sayfaları. Fountain eco pond pump

AllPondSolutions FPP-3000 Manuel
Pump Maintenance
IMPORTANT!
Failure to carry out routine maintenance and/or leaving the pump
with reduced/no flow rate for long periods will result in a shorter pump life and
will invalidate the warranty.
It is recommended to disconnect your pump and clean the impeller and
pipework monthly. Pipework will become blocked with waste and protein slime
over time, so regular cleaning is important for optimal performance.
The frequency of how often you will need to clean and inspect your unit of
course will depend on a lot of factors like how dirty the water is when you first
start using your pump, your pond volume and also how many fish you have.
How often you feed your fish and seasonal light
levels will also affect how quickly your pond water
gets dirty and will need to be taken into
consideration when planning how often to clean
your FPP unit.
Main filter housing - firmly pull pump guard from
pump motor.
Impeller - remove the base plate from the unit by sliding it off away from the
pump's body. The impeller can be accessed by removing the impeller cover by
turning it anti-clockwise to release lock.
The impeller can then be gently pulled away from the housing and inspected.
Ensure that the plastic propeller part of the impeller is attached to the
magnetic part and that they have not come apart or split. If this is the case you
need to replace your impeller. Wash parts with fresh water carefully.