AllPondSolutions CUV-155 Manuel - Sayfa 5
Sterilizatör AllPondSolutions CUV-155 için çevrimiçi göz atın veya pdf Manuel indirin. AllPondSolutions CUV-155 17 sayfaları. Pond & aquarium uv steriliser
Sayfayı Yazdır
INSTALLATION & USE
Please read the below instructions carefully before beginning to set up your UV
steriliser system. DO NOT CONNECT THE UNIT TO THE MAINS UNTIL SET UP IS
COMPLETE.
1. Prior to installing the unit, examine the quartz sleeve and UV bulb to make
sure these have not been damaged in transportation (see maintenance section).
Handle with care. Do not hold UV bulb with bare hands as this can affect
performance.
2. Assemble your CUV unit as shown below and ensure quartz sleeve is water
tight.
PLEASE NOTE:
unlike other sterilisers, CUV units come with three to four
(depending on the model) inlet / outlet's - very useful if you want to run the
output to a two-fall waterfall, or indeed a waterfall and a filter. The steriliser is
also supplied with a separate glass viewport which can be used to replace one
of the hosetails for use as a one-in / one-out unit. The CUV-172 model has 2
viewports.
CUV-118 / 136 / 155
CUV-172