Miller ArcReach SuitCase Non-CE Kullanıcı El Kitabı - Sayfa 32
Kaynak Sistemi Miller ArcReach SuitCase Non-CE için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller ArcReach SuitCase Non-CE 48 sayfaları.
Sayfayı Yazdır
�
Complete Parts List is available at www.MillerWelds.com
DIP Switch Settings
Display Feeder Information - Set switch 5 so the depressed section is toward OPEN as labeled on the switch.
With switch in ON position, at feeder power up, feeder will display various sets of information. Each set of information
will be displayed for three seconds.
Display Board (PC22) Software Part Number -Top display will show the first three digits, bottom display will show
last three digits of the Display board (PC22) software revision level.
Motor Board (PC1) Software Part Number -Top display will show the first three digits, bottom display will show last
three digits of the Motor board (PC1) software revision level.
Accumulated Weld Time -This is the time the feeder has actually been used for welding. This information will be dis-
played in two halves. First half being years (top display) and days (bottom display), second half is hours (top display)
and minutes (bottom display).
Do Not Display Feeder Information (Factory Default) - Set switch 5 so the depressed section is toward 5 as labeled
on the switch.
Feeder information is not displayed.
OM-278792 Page 26