Miller Gold Seal 422 Kullanıcı El Kitabı - Sayfa 20
Kaynak Sistemi Miller Gold Seal 422 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Gold Seal 422 37 sayfaları. Arc welding power source and wire feeder
Sayfayı Yazdır
5-6. Changing Liner, And Cleaning Gun
OM-187 926 Page 18
3/8 in
Remove nozzle,
contact tip, and
liner collet.
Gun/feeder
connector
Tools Needed:
3/8 in
Turn off welding power
source/wire feeder.
3/8 in
Blow out
gun casing.
Remove liner
To Reassemble Gun:
Install contact tip.
Insert new liner.
Install collet onto liner and tighten
into gun/feeder connector using
wrench.
Cut liner off near collet so that liner
end is as close to drive rolls as pos-
sible without touching.
Install nozzle.
Ref. ST-801 979