aquanta AQ-CA-E100-ESL Kurulum Talimatları Kılavuzu - Sayfa 12
Kontrolör aquanta AQ-CA-E100-ESL için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. aquanta AQ-CA-E100-ESL 12 sayfaları. Smart water heater controller
Sayfayı Yazdır
Tips
1. If your home Wi-Fi network has changed, such as a new router, SSID or
Password, the Wi-Fi Setup procedure for the Aquanta Controller must be
redone. First, the Aquanta Controller must be put into the Wi-Fi reconfiguration
mode (aka AP-mode) by pressing and holding the button on the right side of
the controller for 10 seconds until the LED begins to blink.
2. You can force the Aquanta Controller to activate your hot water cylinder
permanently by first putting it in Wi-Fi reconfiguration mode, as described
above, and then cycling power to the Controller by switching the circuit breaker
OFF and back ON. The LED will be blinking green.
Thank you and enjoy your Aquanta unit!
12